FIRMWARE UPGRADATION OF CISCO MDS 9148 SWITCH
# ssh admin@(IP OF SWITCH)
Password:
Cisco Nexus
Operating System (NX-OS) Software
1)To show vesion
EDGESWITCH# show
version
Software
BIOS: version 1.0.18
loader: version N/A
kickstart:
version 5.0(1a)
system: version 5.0(1a)
BIOS
compile time: 01/07/10
kickstart
image file is: bootflash:/m9100-s3ek9-kickstart-mz.5.0.1a.bin
kickstart
compile time: 12/25/2020 12:00:00 [02/21/2010 20:09:44]
system
image file is: bootflash:/m9100-s3ek9-mz.5.0.1a.bin
system
compile time: 2/2/2010 17:00:00 [02/21/2010 23:13:41]
Hardware
cisco MDS
9148 FC (1 Slot) Chassis ("1/2/4/8 Gbps FC/Supervisor-3")
Motorola,
e500v2 with 1036308 kB of memory.
Processor
Board ID JAF1642ANFC
Device
name: IDC1-SW05
bootflash: 1000944 kB
Kernel uptime is 0
day(s), 2 hour(s), 29 minute(s), 4 second(s)
Last reset
Reason:
Unknown
System
version: 5.0(1a)
Service:
EDGESWITCH# dir
bootflash:
950 Oct 21 23:04:07 2012 license_AMS16350858_15.lic
16384 Oct 21 22:59:21 2012 lost+found/
18693120 Oct 21 23:00:58 2012
m9100-s3ek9-kickstart-mz.5.0.1a.bin
73579433 Oct 21 23:03:36 2012 m9100-s3ek9-mz.5.0.1a.bin
2085 Oct 11 06:06:04 2013 mts.log
Usage for
bootflash://sup-local
143601664
bytes used
533508096
bytes free
677109760
bytes total
2)copy Firmware
files (m9100-s3ek9-mz.6.2.3.bin & m9100-s3ek9-kickstart-mz.6.2.3.bin)
EDGESWITCH# copy ftp://<SERVERIP>/tmp/nos/9148/m9100-s3ek9-mz.6.2.3.bin
bootflash:
Enter username:
sap
Password:
EDGESWITCH# dir
bootflash:
950 Oct 21 23:04:07 2012 license_AMS16350858_15.lic
16384 Oct 21 22:59:21 2012 lost+found/
18693120 Oct 21 23:00:58 2012
m9100-s3ek9-kickstart-mz.5.0.1a.bin
19984384 Oct 11 08:36:34 2013
m9100-s3ek9-kickstart-mz.6.2.3.bin
73579433 Oct 21 23:03:36 2012 m9100-s3ek9-mz.5.0.1a.bin
73345328 Oct 11 08:37:10 2013 m9100-s3ek9-mz.6.2.3.bin
2085 Oct 11 06:06:04 2013 mts.log
Usage for
bootflash://sup-local
237035520
bytes used
440074240
bytes free
677109760
bytes total
3)upgrade switches
# install all
kickstart bootflash:m9100-s3ek9-kickstart-mz.6.2.3.bin system
bootflash:m9100-s3ek9-mz.6.2.3.bin
Verifying image
bootflash:/m9100-s3ek9-kickstart-mz.6.2.3.bin for boot variable
"kickstart".
[####################]
100% -- SUCCESS
Verifying image
bootflash:/m9100-s3ek9-mz.6.2.3.bin for boot variable "system".
[####################]
100% -- SUCCESS
Verifying image
type.
[####################]
100% -- SUCCESS
Extracting
"system" version from image bootflash:/m9100-s3ek9-mz.6.2.3.bin.
[####################]
100% -- SUCCESS
Extracting
"kickstart" version from image
bootflash:/m9100-s3ek9-kickstart-mz.6.2.3.bin.
[####################]
100% -- SUCCESS
Extracting
"bios" version from image bootflash:/m9100-s3ek9-mz.6.2.3.bin.
[#
] 0%
[####################] 100% -- SUCCESS
Performing Compact
Flash and TCAM sanity test.
[####################]
100% -- SUCCESS
Performing module
support
checks.
[####################] 100% -- SUCCESS
Notifying services
about system
upgrade.
[####################] 100% -- SUCCESS
Compatibility
check is done:
Module
bootable Impact
Install-type Reason
------
-------- -------------- ------------ ------
1 yes
non-disruptive reset
Images will be
upgraded according to following table:
Module
Image
Running-Version(pri:alt)
New-Version Upg-Required
------
---------- ----------------------------------------
-------------------- ------------
1
system
5.0(1a)
6.2(3) yes
1
kickstart
5.0(1a)
6.2(3) yes
1 bios
v1.0.18(01/07/10): v1.0.18(01/07/10)
v1.0.19(02/01/10)
yes
Do you want to
continue with the installation (y/n)? [n]
EDGESWITCH#
install all kickstart bootflash:m9100-s3ek9-kickstart-mz.6.2.3.bin system
bootflash:m9100-s3ek9-mz.6.2.3.bin
Verifying image
bootflash:/m9100-s3ek9-kickstart-mz.6.2.3.bin for boot variable
"kickstart".
[####################]
100% -- SUCCESS
Verifying image
bootflash:/m9100-s3ek9-mz.6.2.3.bin for boot variable "system".
[####################]
100% -- SUCCESS
Verifying image
type.
[####################]
100% -- SUCCESS
Extracting
"system" version from image bootflash:/m9100-s3ek9-mz.6.2.3.bin.
[####################]
100% -- SUCCESS
Extracting
"kickstart" version from image
bootflash:/m9100-s3ek9-kickstart-mz.6.2.3.bin.
[####################]
100% -- SUCCESS
Extracting
"bios" version from image bootflash:/m9100-s3ek9-mz.6.2.3.bin.
[####################]
100% -- SUCCESS
Performing Compact
Flash and TCAM sanity test.
[####################]
100% -- SUCCESS
Performing module
support
checks.
[####################] 100% -- SUCCESS
Notifying services
about system
upgrade.
[####################] 100% -- SUCCESS
Compatibility
check is done:
Module
bootable Impact
Install-type Reason
------
-------- -------------- ------------ ------
1 yes non-disruptive
reset
Images will be
upgraded according to following table:
Module
Image
Running-Version(pri:alt)
New-Version Upg-Required
------
---------- ----------------------------------------
-------------------- ------------
1
system
5.0(1a)
6.2(3) yes
1
kickstart
5.0(1a)
6.2(3) yes
1 bios
v1.0.18(01/07/10): v1.0.18(01/07/10)
v1.0.19(02/01/10)
yes
Do you want to
continue with the installation (y/n)? [n] y
Install is in
progress, please wait.
Performing runtime
checks.
[####################] 100% -- SUCCESS
Notifying services
about the
upgrade.
[####################] 100% -- SUCCESS
Setting boot
variables.
[####################]
100% -- SUCCESS
Performing
configuration copy.
[####################]
100% -- SUCCESS
Module 1:
Refreshing compact flash and upgrading bios/loader/bootrom.
Warning: please do
not remove or power off the module at this time.
[####################]
100% -- SUCCESS
Upgrade can no
longer be aborted, any failure will result in a disruptive upgrade.
Freeing memory in
the file
system.
[####################] 100% -- SUCCESS
Loading images
into
memory.
[####################] 100% -- SUCCESS
Saving linecard
runtime
state.
[####################] 100% -- SUCCESS
Saving supervisor
runtime
state.
[####################] 100% -- SUCCESS
Saving mts
state.
[####################] 100% -- SUCCESS
Rebooting the
switch to proceed with the upgrade.
# ssh admin@xx.xx.xx.xx
Password:
EDGESWITCH# show
version
Software
BIOS: version 1.0.19
loader: version N/A
kickstart:
version 6.2(3)
system: version 6.2(3)
BIOS
compile time: 02/01/10
kickstart
image file is: bootflash:///m9100-s3ek9-kickstart-mz.6.2.3.bin
kickstart
compile time: 7/10/2013 2:00:00 [07/31/2013 10:05:08]
system
image file is: bootflash:///m9100-s3ek9-mz.6.2.3.bin
system
compile time: 7/10/2013 2:00:00 [07/31/2013 11:15:29]
Hardware
cisco MDS
9148 FC (1 Slot) Chassis ("1/2/4/8 Gbps FC/Supervisor-3")
Motorola,
e500v2 with 1036300 kB of memory.
Processor
Board ID JAF1642ANFC
Device
name: IDC1-SW05
bootflash: 1000944 kB
Kernel uptime is 0
day(s), 0 hour(s), 2 minute(s), 44 second(s)
Last reset at
431992 usecs after Fri Oct 11 08:45:32 2013
Reason:
Reset due to upgrade
System
version: 5.0(1a)
Service:
IDC1-SW05#
IDC1-SW05# reload
This command will
reboot the system. (y/n)? [n] y
Read from remote
host 10.128.38.55: Connection reset by peer
Connection to
10.128.38.55 closed.
sap@P072XSTRMG # ssh admin@xx.xx.xx.xx
Could not create
directory '/home/sap/.ssh'.
The authenticity
of host '10.128.38.55 (10.128.38.55)' can't be established.
RSA key
fingerprint is a8:ab:9b:b0:39:a8:15:03:c2:ee:76:73:96:09:14:4f.
Are you sure you
want to continue connecting (yes/no)? yes
Failed to add the
host to the list of known hosts (/home/sap/.ssh/known_hosts).
User Access
Verification
Password:
Cisco Nexus
Operating System (NX-OS) Software
Copyright (c)
2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to
certain works contained in this software are
owned by other
third parties and used and distributed under
license. Certain
components of this software are licensed under
the GNU General
Public License (GPL) version 2.0 or the GNU
Lesser General
Public License (LGPL) Version 2.1. A copy of each
such license is
available at
IDC1-SW05#
IDC1-SW05# show
version
Cisco Nexus
Operating System (NX-OS) Software
Copyright (c)
2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to
certain works contained herein are owned by
other third
parties and are used and distributed under license.
Some parts of this
software are covered under the GNU Public
License. A copy of
the license is available at
Software
BIOS: version 1.0.19
loader: version N/A
kickstart:
version 6.2(3)
system: version 6.2(3)
BIOS
compile time: 02/01/10
kickstart
image file is: bootflash:///m9100-s3ek9-kickstart-mz.6.2.3.bin
kickstart
compile time: 7/10/2013 2:00:00 [07/31/2013 10:05:08]
system
image file is: bootflash:///m9100-s3ek9-mz.6.2.3.bin
system
compile time: 7/10/2013 2:00:00 [07/31/2013 11:15:29]
Hardware
cisco MDS
9148 FC (1 Slot) Chassis ("1/2/4/8 Gbps FC/Supervisor-3")
Motorola,
e500v2 with 1036300 kB of memory.
Processor Board
ID JAF1642ANFC
Device
name: IDC1-SW05
bootflash: 1000944 kB
Kernel uptime is 0
day(s), 0 hour(s), 2 minute(s), 7 second(s)
Last reset at
856438 usecs after Fri Oct 11 08:49:19 2013
Reason:
Reset Requested by CLI command reload
System
version: 6.2(3)
Service:
===============
1.To SHOW MODULE:-
IDC1-CSW02# show
module
Mod
Ports
Module-Type
Model
Status
---
----- ----------------------------------- ------------------ ----------
1
32 1/2/4/8/10 Gbps Advanced FC Module
DS-X9232-256K9 ok
2
32 1/2/4/8/10 Gbps Advanced FC Module
DS-X9232-256K9 ok
3
32 1/2/4/8/10 Gbps Advanced FC Module
DS-X9232-256K9 ok
4
32 1/2/4/8/10 Gbps Advanced FC Module
DS-X9232-256K9 ok
7
0
Supervisor/Fabric-2a
DS-X9530-SF2AK9 active *
8
0
Supervisor/Fabric-2a
DS-X9530-SF2AK9 ha-standby
Mod
Sw
Hw World-Wide-Name(s) (WWN)
---
-------------- ------
--------------------------------------------------
1
6.2(3)
1.1 20:01:54:7f:ee:af:95:40 to 20:20:54:7f:ee:af:95:40
2
6.2(3)
1.1 20:41:54:7f:ee:af:95:40 to 20:60:54:7f:ee:af:95:40
3
6.2(3)
1.1 20:81:54:7f:ee:af:95:40 to 20:a0:54:7f:ee:af:95:40
4
6.2(3)
1.1 20:c1:54:7f:ee:af:95:40 to 20:e0:54:7f:ee:af:95:40
7
6.2(3)
1.4 --
8
6.2(3)
1.4 --
Mod
MAC-Address(es)
Serial-Num
---
-------------------------------------- ----------
1
68-ef-bd-a8-da-dc to 68-ef-bd-a8-da-df JAF1723AABS
2
68-ef-bd-a8-db-44 to 68-ef-bd-a8-db-47 JAF1723AADD
3
68-ef-bd-a8-db-38 to 68-ef-bd-a8-db-3b JAF1723AACA
4
68-ef-bd-a8-da-a0 to 68-ef-bd-a8-da-a3 JAF1723AABA
7
c8-9c-1d-41-d3-3c to c8-9c-1d-41-d3-3f JAF1722BFSF
8
c8-9c-1d-41-d3-2c to c8-9c-1d-41-d3-2f JAF1723ACAK
Xbar Ports
Module-Type
Model
Status
---
----- ----------------------------------- ------------------ ----------
1
0 Fabric Module
3
DS-13SLT-FAB3 ok
2
0 Fabric Module
3
DS-13SLT-FAB3 ok
Xbar
Sw
Hw World-Wide-Name(s) (WWN)
---
-------------- ------
--------------------------------------------------
1
NA
1.4 --
2
NA
1.4 --
Xbar
MAC-Address(es)
Serial-Num
---
-------------------------------------- ----------
1
NA
JAF1721ANEA
2
NA
JAF1721ANGN
* this terminal
session
edge switch:-
IDC1-SW06# show
module
Mod
Ports
Module-Type
Model
Status
---
----- ----------------------------------- ------------------ ----------
1
48 1/2/4/8 Gbps
FC/Supervisor-3
DS-C9148-K9-SUP active *
Mod
Sw
Hw World-Wide-Name(s) (WWN)
---
-------------- ------ --------------------------------------------------
1
6.2(3)
1.1 20:01:54:7f:ee:b8:08:d8 to 20:30:54:7f:ee:b8:08:d8
Mod
MAC-Address(es)
Serial-Num
---
-------------------------------------- ----------
1
30-f7-0d-c9-8b-c8 to 30-f7-0d-c9-8b-cb JAF1642ANJH
* this terminal
session
===========================================
2)To see the
interface information
IDC1-CSW02(config)#
show interface
fc1/1 is up
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:01:54:7f:ee:af:95:40
Admin port mode is FX, trunk mode is on
snmp link state traps are enabled
Port mode is F, FCID is 0x090000
Port vsan is 20
Speed is 8 Gbps
Rate mode is shared
Transmit B2B Credit is 20
Receive B2B Credit is 32
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 4314112 bits/sec,539264 bytes/sec, 266 frames/sec
5 minutes output rate 24544 bits/sec,3068 bytes/sec, 59 frames/sec
128838407 frames input,164820321624 bytes
0 discards,0 errors
0 invalid CRC/FCS,0 unknown class
0 too long,0 too short
420867885 frames output,810133110612 bytes
0 discards,0 errors
0 input OLS,0 LRR,0 NOS,0 loop inits
1 output OLS,1 LRR, 0 NOS, 1 loop inits
32 receive B2B credit remaining
20 transmit B2B credit remaining
20 low priority transmit B2B credit remaining
Interface last changed at Fri Nov 15 09:47:29 2013
Last clearing of "show interface" counters :never
similarly it shows
all switch ports
=============================================================
3)to show all
switch interfaces information breafly
IDC1-CSW02(config)#
show interface brief
-------------------------------------------------------------------------------
Interface
Vsan Admin Admin
Status SFP Oper
Oper Port
Mode
Trunk
Mode Speed Channel
Mode
(Gbps)
-------------------------------------------------------------------------------
fc1/1
20 FX
on
up swl
F 8 --
fc1/2
20 FX
on
up swl
F 8 --
fc1/3
20 FX
on
up swl
F 8 --
fc1/4
20 FX
on
up swl
F 8 --
fc1/5
20 FX
on
up swl
F 8 --
fc1/6
20 FX
on
up swl
F 8 --
fc1/7
20 auto on
trunking swl TE
8 --
;
;
;
fc1/12
20 FX
on notConnected swl
-- -- --
;
;
fc1/23
20 auto on
trunking swl TE
8 --
fc1/24
20 auto on
trunking swl TE
8 --
;
;
fc4/23
20 auto on
trunking swl TE
8 --
fc4/24
20 auto on
trunking swl TE
8 --
fc4/25
20 FX
on
up swl
F 8 --
fc4/26
20 FX
on notConnected swl
-- -- --
fc4/27
20 FX
on
up swl
F 8 --
fc4/28
20 FX
on notConnected swl
-- -- --
fc4/29
20 FX
on
up swl
F 8 --
fc4/30
20 FX
on notConnected swl
-- -- --
fc4/31
20 FX
on
up swl
F 8 --
fc4/32
20 FX on
notConnected swl --
-- --
-------------------------------------------------------------------------------
Interface
Status
Speed
(Gbps)
-------------------------------------------------------------------------------
sup-fc0
up
1
-------------------------------------------------------------------------------
Interface
Status IP Address
Speed MTU
-------------------------------------------------------------------------------
mgmt0
up
10.128.38.50/27 1 Gbps 1500
========================================================
4)to show version of
switch
IDC1-CSW02(config)#
show version
Software
BIOS: version 1.0.10
loader: version N/A
kickstart:
version 6.2(3)
system: version 6.2(3)
BIOS
compile time: 01/08/09
kickstart
image file is: bootflash:///m9500-sf2ek9-kickstart-mz.6.2.3.bin
kickstart
compile time: 7/10/2013 2:00:00 [07/31/2013 10:05:06]
system
image file is: bootflash:///m9500-sf2ek9-mz.6.2.3.bin
system
compile time: 7/10/2013 2:00:00 [07/31/2013 11:31:55]
Hardware
cisco MDS
9513 (13 Slot) Chassis ("Supervisor/Fabric-2a")
Motorola,
7447A, altivec with 2071288 kB of memory.
Processor
Board ID JAF1722BFSF
Device
name: IDC1-CSW02
bootflash: 1000944 kB
slot0:
0 kB (expansion flash)
Kernel uptime is
14 day(s), 0 hour(s), 25 minute(s), 57 second(s)
Last reset at
232586 usecs after Fri Nov 15 09:41:51 2013
Reason:
Reset Requested by CLI command reload
System
version: 6.2(3)
Service:
plugin
Core Plugin
5)How to change
switch port speed
IDC1-CSW02(config)#
interface fc3/15
IDC1-CSW02(config-if)#
show interface fc3/15
fc3/15 is up
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:8f:54:7f:ee:af:95:40
Admin port mode is FX, trunk mode is on
snmp link state traps are enabled
Port mode is F, FCID is 0x0904a0
Port vsan is 20
Speed is 8 Gbps
Rate mode is shared
Transmit B2B Credit is 20
Receive B2B Credit is 32
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec,0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec,0 bytes/sec, 0 frames/sec
13 frames input,1132 bytes
0 discards,0 errors
0 invalid CRC/FCS,0 unknown class
0 too long,0 too short
13 frames output,896 bytes
0 discards,0 errors
0 input OLS,0 LRR,0 NOS,0 loop inits
1 output OLS,1 LRR, 0 NOS, 1 loop inits
32 receive B2B credit remaining
20 transmit B2B credit remaining
20 low priority transmit B2B credit remaining
Interface last changed at Fri Nov 15 09:47:32 2013
Last clearing of "show interface" counters :never
IDC1-CSW02(config-if)#
show interface fc3/15 brief
-------------------------------------------------------------------------------
Interface
Vsan Admin Admin
Status SFP Oper
Oper Port
Mode
Trunk
Mode Speed Channel
Mode
(Gbps)
-------------------------------------------------------------------------------
fc3/15
20 FX
on
up swl
F 8 --
IDC1-CSW02(config-if)#
switchport speed 4000
IDC1-CSW02(config-if)#
show interface fc3/15 brief
-------------------------------------------------------------------------------
Interface
Vsan Admin Admin
Status SFP Oper
Oper Port
Mode
Trunk
Mode Speed Channel
Mode
(Gbps)
-------------------------------------------------------------------------------
fc3/15
20 FX
on
up swl
F 4 --
IDC1-CSW02(config-if)#
switchport speed auto
IDC1-CSW02(config-if)#
show interface fc3/15 brief
-------------------------------------------------------------------------------
Interface
Vsan Admin Admin
Status SFP Oper
Oper Port
Mode
Trunk
Mode Speed Channel
Mode
(Gbps)
-------------------------------------------------------------------------------
fc3/15
20 FX
on
up swl
F 8 --
6)PORT MODES
FC port
have only one mode at a time
16 prot
blade/slot default mode is AUTO
32 port
blade/slot default mode is FX
modes:-
i)E -->
used for expansion of fabric i.e one end of ISL
ii)F --> used
for host/san i.e end devices
iii)N --> for
end devices side
iv)FL --> for
loop devices
v)Fx -->
for
vi)G
-->generic port
vii)SD
iix)St
ix)TL
x)U
